Assembly – Lincoln Electric IM946 CRUISER Digital Tractor User Manual

Page 39

Cruiser™ Tractor

ASSEMBLY

3-20

16. Rotate the drive roll faceplate ap-

proximately 45˚ clockwise by loos-
ening the faceplate locking screw
using a 5/16-inch (8 mm) Allen
wrench. Check that the angle of the
nozzle assembly is at 45˚ from the
horizontal and tighten the drive roll
faceplate locking screw.

17. Mount the front geared wheel as-

sembly to the left-hand end of the
short horizontal cross tube. Ensure
that the side-face of the wheel is
facing downward and parallel to the
Cruiser™ tractor’s surface. Once
mounted, tighten two bolts using a
1/2-inch (13 mm) wrench. This
wheel will now act as a third guide
and support wheel when the
Cruiser™ tractor is set in a 45˚
trough.

18. Remount the front outrigger bar with

two machine screws using a 7/16-
inch (11 mm) wrench, so the guide-
wheel faces upward and extends to
the left. Do not tighten at this time
as the extension to the left still
needs to be set.