Assembly – Lincoln Electric IM946 CRUISER Digital Tractor User Manual

Page 21

Text mode
Original mode

Cruiser™ Tractor

ASSEMBLY

3-2

1. Loosen wire drive mounting bracket

from horizontal slide by loosening four
nuts using a 1/2-inch (13 mm) wrench.
Relocate the wire drive bracket lo-
cated almost in the center of the hori-
zontal slide.

2. Turn the crank as shown to locate the

wire drive mounting bracket in the cen-
ter of the horizontal slide. Tighten the
four nuts.

3. Loosen the feedplate locking screw

using a 5/16 inch (8 mm) Allen
wrench. Rotate the feedplate counter-
clockwise to 45˚. Tighten the feedplate
locking screw.