Watlow MLS - Manual (Page 71)

MLS User’s Guide 59
Setup
The Setup menus let you change the MLS' detailed configuration
information.
If you have not set up a Modular Loop System before, or if you don't
know what values to enter, please read first the next chapter,
Tuning and
Control which contains PID tuning constants and useful starting values.
How to enter the Setup menus?
1. In Single Loop Display, select the loop you wish to edit.
2. While still in Single Loop Display, enter the pass sequence below:
Press Enter , Alarm Ack , Change Setpoint .
3. The first setup menu appears.
NOTE
For your protection, MLS reverts to Single Loop Dis-
play If you don't make any changes for three minutes.
How to edit a menu?
• Press Yes to select this menu or No to advance to the next menu.
• press Yes or No to toggle between the options in your menu.
• Press Enter to store the value you have selected.
• If you decide not to edit the menu, press Back to stop editing and
return to the main menu.
In the next sections you will find detailed information about the
submenus for each of the six main menus.
Each display contains the default value for that specific menu, and
below each display you will see the range of choices for that menu.
The next page shows a diagram describing the six main menus and all
the submenus in each one of them.