Watlow MLS - Manual (Page 59)

Using the MLS
MLS User’s Guide 47
Using the MLS
This chapter explains how to use the front panel to operate the
controller. (If you are using ANASOFT, see the operation instructions in
the ANASOFT User's Guide.) The next figure shows a map of the
operator menus and displays accessible from the MLS Controller's front
panel. You don't need to enter a passkey sequence to reach these menus.
To make detailed changes to global parameters, loop inputs, control
parameters, outputs, and alarms via the setup menus, you must enter a
special sequence of keys. (For more information about the Setup menus,
see Chapter 4: Setup.)