Watlow MLS - Manual (Page 29)

Installation
MLS User’s Guide 17
Recommended Tools
This section lists the tools you will need to install the MLS Controller.
Panel Hole Cutters
Use any of these tools to cut a hole in the panel:
• A jigsaw and metal file--for stainless steel and other heavyweight
panel doors.
• A Greenlee 1/8 DIN rectangular punch (Greenlee part #600-68)--for
most panel materials or thicknesses.
• A nibbler and metal file--for aluminum and other lightweight panel
doors.
Other Tools
You'll also need these tools:
• A Phillips head screwdriver.
• A flathead screwdriver for wiring.
• A multimeter.
• A phone connector crimping tool made of metal (optional).
Watlow-Anafaze provides all the cabling for the Modular Loop System.
If you have special cabling requirements and you make your own RJ12
cable, use a metal crimping tool for the connectors. (A metal tool makes
better connections than a plastic tool.)
Additional Hardware
The following additional hardware is also shipped to you:
• Four #6 screws for mounting the AIM-TB.
• #10 screws for mounting the optional MLS Power Supply.