IEI Integration WAFER-LX v1.0 - Manual (Page 80)

WAFER-LX
24 24 characters per second
30 30 characters per second
x Typematic Delay (Msec) [250]
The Typematic Delay can only be configured if the Typematic Rate Setting is enabled. The
Typematic Delay configuration field allows you to select the delay between when the key was first
depressed and when the acceleration begins.
250 (D EFAULT ) 250 milliseconds
500 500 milliseconds
750 750 milliseconds
1000 1000 milliseconds
Gate A20 Option
This option determines the Gate A20 control options. This option only avails in older, DOS, or
16-/32-bit operating systems. For systems running newer, protected or real mode, operating
systems, this option should never be changed.
Security Option [Setup]
The Security Option configuration option allows you to limit access to the system and Setup or
just to the Setup.
Setup (D EFAULT ) The system will not boot and access to Setup will be
denied if the correct password is not entered at the
prompt.
System The system will boot, but access to Setup will be denied if
the correct password is not entered at the prompt.
NOTE:
To disable security, select the password setting in the Main Menu. When
asked to enter a password, do not type anything, press, “E NTER ” and the
security is disabled. Once the security is disabled, the system will boot and
you can enter Setup freely.
4-15 4-15