IEI Integration WAFER-LX v1.0 - Manual (Page 78)

WAFER-LX
3. Third Boot Device [D EFAULT : LS120]
The Boot Device configuration options allow you to select the order of devices the computer will
boot from. Using the default values, the system will first look for a FDD to boot from. If it cannot find
an FDD it will use an HDD to boot from. If both a FDD and a HDD are unavailable then the system
will boot from a LS120 (Super Disk) drive.
Boot Device configuration options are:
1. Floppy
2. LS120
3. HDD-0
4. SCSI
5. CDROM
6. HDD-1
7. ZIP100
8. USB-FDD
9. USB-ZIP
10. USB-CDROM
11. USB-HDD
12. LAN
13. Disabled
Boot Other Device [Enabled]
The Boot Other Device option determines whether the CPU card will use a second or third boot
device if the first boot device is not found.
Enabled (D EFAULT ) The system will look for second and third boot devices if
the first one is not found.
Disabled The system will not look for second and third boot device
if the first one is not found.
Swap Floppy Drive [Disabled]
This option should not avail because FPC interface only allows the connection to one floppy drive.
Boot Up Floppy Seek [Enabled]
4-13 4-13