Features and benefits, Wafer-lx – IEI Integration WAFER-LX v1.0 User Manual

Page 125

WAFER-LX

However, if you replace the wrong drive when you are trying to remove a failed one,

irrecoverable data loss will occur! It is therefore strongly recommended to mark the

physical connections of all of your SATA disk drives. If a drive member of a RAID array

should fail, you will then be able to correctly locate a failed drive.

For example, you may specify the drive locations by attaching stickers to the drive bays. You

need a reminder if the cabling does not match the physical locations of hard drives.

2. It is also crucial that you do not accidentally disconnect the SATA drive cables. Carefully

route your cables within the chassis to avoid system down time.

2. Features and Benefits

Supports RAID levels 0, 1, and JBOD.

Supports the connectivity to two disk drives.

The supported Operating Systems include: Windows 98/Me, Windows 2000, and

Windows XP.

Windows-based software for RAID management.

C-3