IEI Integration WAFER-LX v1.0 - Manual (Page 102)

WAFER-LX
x Time(hh:mm:ss) Alarm [0 : 0 : 0]
The Time(hh:mm:ss) Alarm option can only be configured if the Resume by Alarm option has
been enabled. You will have to set the time you wish the computer to be roused. You will see three
zeroes side by side. The first zero is for the hour, the second zero for the minutes and the third
zero for the seconds.
1. Hour (first zero): Select a number between 0 and 23
2. Minute (second zero): Select a number from 0 to 59
3. Second (third zero): Select a number from 0 to 59
Reload Global Timer Events
The Reload Global Timer Events field has the following BIOS configuration options
1. Primary IDE 0
2. Primary IDE 1
3. Secondary IDE 0
4. Secondary IDE 1
5. FDD, COM, LPT Port
6. PCI PIRQ[A-D]
All the above options have “Disabled” as their default value. When disabled, if any activity occurs
on these devices during a suspended state, the system will not be roused.
If “Enabled” is selected for any of the above devices, and if activity is recorded on an enabled
device in the above list the system will be roused from its suspended state.
1.1.10 Onboard Device
The OnBoard Device menu (BIOS Menu 12) allows you to change the USB and LAN device
configurations.
4-37 4-37