IEI Integration WAFER-LX v1.0 User Manual
Page 74
WAFER-LX
None
If you have no drives connected to the IDE channel
select this option. Once set, this IDE channel will
become inaccessible and any drives attached to it
undetected.
Auto
(D
EFAULT
)
Setting this option allows the device to be automatically
detected by the BIOS
Manual
Selecting this option allows you to manually configure
the device on the IDE channel in BIOS.
Access Mode [Auto]
The Access Mode option allows you to determine the hard disk BIOS translation modes. Most
systems now use hard drives with large capacities and therefore either the LBA translation mode
or auto should be selected.
CHS
Select this mode if the HDD capacity is less than
504MB.
LBA
Select this mode if the HDD capacity is more than
8.4GB.
Large
This mode is an extended ECHS mode and while it
supports HDDs larger than 504MB, it is not
recommended.
Auto
(D
EFAULT
)
If you are unsure of what access mode to set, select this
option
Capacity
The Capacity specification tells the user the storage capacity of the HDD installed in the system.
Cylinder
The Cylinder specification tells the user how many cylinders (tracks) are on the HDD installed in
the system.
Head
The Head specification tells the user how many logical heads are on the HDD installed in the
system.
4-9
4-9