IEI Integration WAFER-LX v1.0 User Manual
Page 100
WAFER-LX
that if you selected max. or min. as the setting for the Power Management option, you will not be
able to configure this setting. The following settings can be made.
Disable (D
EFAULT
)
1 Min
2 Min
3 Min
4 Min
5 Min
6 Min
7 Min
8 Min
9 Min
10 Min
11 Min
12 Min
13 Min
14 Min
15 Min
Soft –Off by PWR-BTTN [Instant-Off]
The Soft –Off by PWR-BTTN option allows you to define how the system responds when the
power button is pushed. You may choose to allow the system to be either turned off completely or
enter into a suspend mode.
Instant-Off
(D
EFAULT
)
The system will be turned off as soon as the power
button is pressed.
Delay 4 Sec
The power button must be pressed for more than
four seconds before it is turned off. If it is pressed for
less than four seconds the system will enter a
suspend state.
Wake-Up by PCI Card [Enabled]
The Wake-Up by PCI Card option allows users to wake a system in a suspended state through a
network. A wakeup signal from a network can be routed directly through the PCI card.
Disabled
The system cannot be woken from a suspend state
4-35
4-35