IEI Integration KINO-CV-D25501_N26001 - Manual (Page 69)

KINO-CV-D25501/N26001 SBC
Page 55
Figure 4-6: LVDS2 Voltage Selection Jumper Location
4.5.5 LVDS2 Resolution Selection
Jumper Label: SW1
Jumper Type: DIP switch
Jumper Settings: See Table 4-6
Jumper Location: See Figure 4-7
The SW1 switch selects the resolution of the LCD panel connected to the LVDS2
connector.
The pin order listed in the first column of Table 4-6 is: 4 Ж 3 Ж 2 Ж 1. (ON=0, OFF=1)
SW1 EDID Resolution Color Depth Channel
0000 800 x 600 @ 60Hz 18-bit Single
0001 1024 x 768 @ 60Hz 18-bit Single
0010 1024 x 768 @ 60Hz 24-bit Single
0011 1280 x 768 @ 60Hz 18-bit Single
0100 1280 x 800 @ 60Hz 18-bit Single
0101 1280 x 960 @ 60Hz 18-bit Single
0110 1280 x 1024 @ 60Hz 24-bit Dual
0111 1366 x 678 @ 60Hz 18-bit Single
1000 1366 x 678 @ 60Hz 24-bit Single
1001 1440 x 900 @ 60Hz 24-bit Dual