IEI Integration KINO-CV-D25501_N26001 - Manual (Page 100)

KINO-CV-D25501/N26001 SBC
Page 86
5.3.6.1.5 Serial Port 5 Configuration
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Î
Disabled Disable the serial port
Î
Enabled D EFAULT Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.
Î
IO=250h;
IRQ=10
Serial Port I/O port address is 250h and the interrupt
address is IRQ10
Î
IO=3F8h;
IRQ=10, 11
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ10, 11
Î
IO=2F8h;
IRQ=10, 11
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ10, 11
Î
IO=3E8h;
IRQ=10, 11
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ10, 11
Î
IO=2E8h;
IRQ=10, 11
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ10, 11
Î
IO=250h;
IRQ=10, 11
Serial Port I/O port address is 250h and the interrupt
address is IRQ10, 11
Î
IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11