beautypg.com

9 connecting the spcie-5100dx to the backplane, Onnecting the, Spcie-5100dx – IEI Integration SPCIE-5100DX User Manual

Page 83: To the, Ackplane, Figure 4-24: vga connector

background image

SPCIE-5100DX PICMG 1.3 CPU Card

Page 69

Figure 4-24: VGA Connector

Step 4:

Secure the connector. Secure the DB-15 VGA connector from the VGA monitor

to the external interface by tightening the two retention screws on either side of

the connector.

Step 0:

4.9 Connecting the SPCIE-5100DX to the Backplane

The SPCIE-5100DX is a PICMG 1.3 form factor CPU card. To install the SPCIE-5100DX

onto the backplane, please follow the instructions below.

Step 1:

Align the edge connectors. Align the four edge connectors (labeled A, B, C and

D in Figure 4-25) on the SPCIE-5100DX with the corresponding connectors on

the PICMG 1.3 backplane. See Figure 4-25.

See also other documents in the category IEI Integration Hardware: