IEI Integration SPCIE-5100DX - Manual (Page 23)

SPCIE-5100DX PICMG 1.3 CPU Card
Page 9
Specification SPCIE-5100DX
I/O Interface Connectors
Display port
One VGA via XGI Volari™ Z9s PCI graphics controller
GPU integrated with 64-bit 64MB GDDR2 memory
Supports resolution up to UXGA(1600x1200) and
CRT hot plug
Ethernet Two RJ-45 ports
Keyboard/Mouse One 5-pin keyboard/mouse pin-header connector
LPT
One IEEE 1284 parallel port supporting normal, EPP and
ECP modes
Serial Ports Two RS-232 serial ports
USB 2.0/1.1 ports
Twelve USB 2.0 devices supported, eight on-board and
four on the backplane
Infrared One infrared connector
Storage
Floppy Disk Drives
One 5.25” 360 KB or 1.2 MB floppy disk drives (FDD) or
3.5” 720 KB, 1.44 MB, 2.88 MB FDD.
Serial ATA
Six independent serial ATA (SATA) channels with 3.0 Gb/s
data transfer rates support RAID 0, 1, 5 and 10
Environmental and Power Specifications
Power Supply ATX supported
Power Consumption
3.3 V @ 1.07 A
5 V @ 5.55 A
12 V @ 12.3 A
Dual 1.60 GHz 5110 Intel® Xeon® CPUs with 1066 MHz
FSB and four 2.0 GB of 667 MHz DDR2 memory running
with 3D Mark 2001SE
Operating temperature 0ºC ~ 60ºC
Humidity 0% ~ 95% (non-condensing)