Figure 4-17: lpt cable connection – IEI Integration SPCIE-5100DX User Manual

Page 76

SPCIE-5100DX PICMG 1.3 CPU Card

Page 62

Step 3:

Insert the cable connectors

Once the cable connector is properly aligned with

the 26-pin box-header connector on the SPCIE-5100DX, connect the cable

connector to the on-board connector. See Figure 4-17.

Figure 4-17: LPT Cable Connection

Step 4:

Attach the LPT connector bracket to the chassis. The LPT cable connector is

connected to a standard external LPT interface connector. To secure the LPT

interface connector to the chassis please refer to the installation instructions that

came with the chassis.

Step 5:

Connect LPT device. Once the LPT interface connector is connected to the

chassis, the LPT device can be connected to the LPT interface connector. See

Step 0:\