3 cooling kit installation, Figure 4-5: cpu 12v power connector, Figure 4-6: iei lga771 cooling kit – IEI Integration SPCIE-5100DX User Manual

Page 62

SPCIE-5100DX PICMG 1.3 CPU Card

Page 48

Figure 4-5: CPU 12V Power Connector

4.4.3 Cooling Kit Installation

Figure 4-6: IEI LGA771 Cooling Kit

Two IEI LGA771 CPU cooling kits (Figure 4-6) are shipped with the SPCIE-5100DX. The

cooling kit comprises a CPU heat sink and a cooling fan. To install the cooling kit, please

follow the steps below.

Step 1:

Remove the four retention screws located near the LGA771 CPU sockets.

NOTE:

The SPCIE-5100DX has a SBC support bracket on the bottom and the

bracket is secured to the board with few retention screws. The SBC support

bracket is to support the CPU cooling fan and the SPCIE-5100DX. To

install the CPU cooling fan, the four retention screws near the CPU sockets

need to be removed.