Figure 4-2: remove protective cover, Figure 4-3: cpu socket load plate – IEI Integration SPCIE-5100DX User Manual

Page 60

SPCIE-5100DX PICMG 1.3 CPU Card

Page 46

Figure 4-2: Remove Protective Cover

Step 2:

Open the socket. Disengage the load lever by pressing the lever down and

slightly outward to clear the retention tab. Fully open the lever, then open the

load plate. See Figure 4-3.

Figure 4-3: CPU Socket Load Plate

Step 3:

Inspect the CPU socket. Make sure there are no bent pins and make sure the

socket contacts are free of foreign material. If any debris is found, remove it with

compressed air.

Step 4:

Orientate the CPU properly. The contact array should be facing the CPU

socket.