IEI Integration SPCIE-5100DX - Manual (Page 17)

SPCIE-5100DX PICMG 1.3 CPU Card
Page 3
1.1.1.1 PCI Expansion
An additional four PCI lanes are interfaced to the backplane through the standard PCI
edge connectors on the bottom of the SPCIE-5100DX CPU card.
1.1.1.2 USB 2.0 Expansion
Twelve USB 2.0 interfaces are also available. Eight of the USB 2.0 interfaces are
implemented directly on the SBC (six internal and two external) and the remaining four
USB 2.0 interfaces are connected to the backplane through the edge connectors.
1.2 SPCIE-5100DX Features
Some of the SPCIE-5100DX features are listed below.
Supports dual LGA771 Intel® Xeon® processors with a 1066 MHz or
1333 MHz FSB
Supports four 240-pin 8.0 GB (max.) 533 MHz or 667 MHz DDR2 ECC
Registered DIMM (system max. 32.0 GB)
Supports up to 1600 x 1200 resolution VGA output
Six SATA II drives with data transfer rates of 3.0 Gbps supported
Twelve USB 2.0 devices supported (eight on-board and four on the
backplane)
Dual PCIe GbE Ethernet connectors
PICMG 1.3 form factor
RoHS compliant
Supports ATX power supplies