Teledyne LeCroy PeRT3 Eagle Systems - Manual (Page 7)

PeRT 3 Eagle User Manual Version 1.6
LeCroy Corporation
3
Chapter 2: Quick Start Guide
This chapter describes how to set up the PeRT 3 Eagle and perform a test on a device
using a pre-programmed test script.
Unpacking the System
The PeRT 3 Eagle is shipped with the following components:
•
PeRT
3
Eagle Hardware Platform
•
PeRT 3 System Software CD
•
AC Power Cord
•
USB Cable to connect Host PC to PeRT
3
Eagle
Unpack the system and verify that all system components are present. If any
components are missing, contact LeCroy Service at 1-800-909-7112 (or 408-653-1260).
Requirements for the Host PC
A host PC system must be supplied to work with the Eagle system with the following
minimum requirements:
•
Intel Pentium 4, AMD Athlon/AMD Duron, or newer compatible processor
with clock speed of at least 2 GHz.
•
Microsoft Windows XP or Windows Vista.
•
Minimum of 1 GB of RAM.
•
Minimum of 25 MB of free hard disk space. Additional space is required for
operation of applications and storing recorded results.
•
Display resolution of at least 1280 x 800 with 24-bit color depth is highly
recommended. Application can be run on 800 x 600 monitor, but user
experience is much better with the higher screen resolution.
•
USB 2.0 port.