Teledyne LeCroy LabMaster 10Zi Operators Manual User Manual
Page 57
Getting Started Manual
922561-00 Rev A
49
From this pop-up you can edit existing annotations, change the label
placement on the waveform, add labels, remove labels, and toggle the
visibility.
If you are modifying an existing label, under Labels touch the label
you want to change.
NOTE
: If the Channel dialog for the trace you want to annotate is currently
displayed, touch the Label button at the bottom to display the Trace
Annotation setup dialog. You may place a label anywhere you want on the
waveform. Labels are numbered sequentially according to the order in
which they are added, and not according to their placement on the
waveform.
If you want to change the label's text, touch inside the Label Text
field. A pop-up keyboard appears for you to enter your text. Touch
O.K. on the keyboard when you are done. The edited text
automatically appears in the label on the waveform.
Precisely place the label by touching inside the Horizontal Pos. field
and provide a horizontal value, using the pop-up numeric keypad.
Add another label by touching the Add label button. Delete a label by
selecting the label from the list, and then touching the Remove label
button.
Make labels visible by touching the View labels checkbox.