Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 23)

Getting Started Manual
922561-00 Rev A
15
Standard High Bandwidth Accessories
The following accessories are delivered in a soft accessory case (SAC-01A)
with 50-65 GHz acquisition modules.
10dB Attenuators
(V-V) Used instead of an internally switched attenuator
for optimal signal fidelity. Needed when >640mVp-
p signals (>80 mV/div) are input to the acquisition
module. Qty. 2
V-female to V-female
Barrel Adapters The native high bandwidth (50-65 GHz) connection
is a male connection. These barrel adapters
provide ability to make a male connection to the
high bandwidth inputs. Qty. 2
Hand Wrench Used to stabilize female-female barrel adapter
when attaching it to the high BW
V-male connector. Do not use this to tighten! Qty. 1
Torque Wrench Used to tighten or loosen the V-female barrel
adapter from the high bandwidth V-male connector.
It should also be used to tighten cables to the V-
female barrel adapter. Qty. 1
USB Memory Stick This contains s-parameter files for the 10 dB
attenuators. A future capability to enter an s-
parameter file for the 10dB attenuator (should they
need to be replaced) will be provided so as to
optimize signal fidelity of the high bandwidth inputs. Qty. 1