Teledyne LeCroy LabMaster 10Zi Operators Manual User Manual
Page 104
LabMaster 10 Zi Oscilloscopes
96
922561-00 Rev A
Moving Traces from Grid to Grid
You can move traces from grid to grid with the touch of a button.
1.
Double-touch the trace descriptor label to activate the waveform you
want to move and open the setup dialog.
2.
Touch the Next Grid shortcut button at the bottom of the setup
dialog.
NOTE
: If you have only one grid open, a second grid automatically opens
when you select Next Grid.
You can also move a trace from one grid to another by dragging the
descriptor box to the desired grid. This is a convenient way to quickly re-
arrange traces on the display.
Displays Containing Masks
Since masks are pixel-based display renderings, you can think of them as
part of the Display feature set on your instrument. Masks and mask testing
are applied to waveforms as part of Pass/Fail functionality accessed from
Analysis → Pass/Fail from the menu bar.
NOTE
: For more detailed information about Masks and other Pass/Fail
functionality, such as removing a mask from your display, refer to Mask Testing
.