Preferences setup, Preferences dialog – Teledyne LeCroy LabMaster 10Zi Operators Manual User Manual
Page 167
Getting Started Manual
922561-00 Rev A
159
Create a Folder
1.
Touch the Create button.
2.
Touch inside the Current folder field and enter the full path to the
new folder. Be sure to include the new folder name.
3.
Touch the Create Folder button.
Preferences Setup
A variety of customizable preferences can be set on your instrument. Access
Preferences by touching Utilities → Preference Setup... on the menu bar.
The main Preferences (below) dialog is displayed by default, with the
following tabs also available:
Acquisition
Color
Miscellaneous
Preferences Dialog
Choose Utilities → Preference Setup... to access the main Preferences
dialog. The following settings are made from this dialog:
Audible Feedback - To have audible confirmation each time you touch a
screen or front panel control, check the Enable box in the Audible Feedback
section of the dialog. With Audible Feedback enabled, the oscilloscope
beeps each time you touch the screen or a front panel control.
Automatic Calibration - To have your instrument automatically re-calibrate
itself whenever there is a significant change in ambient temperature, check
the Enable box in the Automatic Calibration section of the dialog.