Teledyne LeCroy LabMaster 10Zi Operators Manual - Manual (Page 165)

Getting Started Manual
922561-00 Rev A
157
Date/Time
From the Date and Time tab on the Utilities dialog, you can set the
oscilloscope date. time, time zones, and daylight savings time.
Manual Method
Enter the Hour, Minute, Second, Day, Month, and Year. After providing
values, touch the Validate Changes button.
Internet Method
The oscilloscope must be connected to the Internet through the LAN port on
the I/O panel.
First, verify that your oscilloscope is connected to the Internet, then touch
the Set from Internet button. The Simple Network Time Protocol (SNTP) is
used.
Windows Method
To set date and time using the internal Windows® system clock, touch the
Windows Date/Time button. Windows displays a Date and Time Properties
pop-up where the date and time can be configured.
Options
The Options dialog is used to add or remove software options. To learn
about available options, Contact LeCroy for Support (on page 171), or visit
our website at www.teledynelecroy.com/options.
This dialog also displays the ScopeID and Serial #.