IAI America E-Con - Manual (Page 68)

54
Position Data Table (Columns with the thick lines indicate the input insert)
No. Position Speed Acc/Dec Push Positioning Band Acc. only Max
0 * * * * * *
1 150 200 0.3 0 1 0
2 200 100 0.3 0 0.1 0
:
T1: Over 6 msec
Time from Command Position Select Input to Start Signal ON
(However, please consider the scan time of the upper controller.)
Caution: Positioning complete Output will turn OFF and moving output will turn on once the start signal turns
ON. Please execute Start Signal OFF only after confirming that moving output turns ON with Start
Signal ON status.