beautypg.com

Appendix ii: remote switch wiring – Fairbanks FB6002 INSTRUMENTATION User Manual

Page 80

background image

01/13

80

51293 Rev. 2

Attach Remote Switch wires to

Terminal J17

of the Base Board.

Appendix II: Remote Switch Wiring

NOTE:

The Remote Switches and the 20mA share a ground wire.

– This means that remote switches, if used simultaneously with a remote display,

must NOT be grounded. Otherwise they risk creating a ground loop thorough
the instrument’s main circuit board.

– Connect Switch Legs to non-grounded-bonded dry contact only. If the display is

fully isolated (non-bonded), this is not an issue

J 17 CONNECTION

FUNCTION

1 and 2

Zero

3 and 4

Print

5 and 6

Tare

7 and 8

Gross/Net

This manual is related to the following products: