Fairbanks FB6002 INSTRUMENTATION - Manual (Page 55)

Section 6: Serial Input / Output
01/13 55 51293 Rev. 2
6.3.2.Select Format
1. In the Configuration Menu, press the down arrow until SELECT SELECT SELECT SELECT FORMAT FORMAT FORMAT FORMAT
displays.
2. Press either the ENTER button, or use the down arrow to select one of the five
(5) Format Options.
•
GTN GTN GTN GTN
•
Inbound Inbound Inbound Inbound
•
outbound outbound outbound outbound
•
BasicIN BasicIN BasicIN BasicIN
•
BasicOut BasicOut BasicOut BasicOut
3. When selecting the mode, press the down arrow to enter either DISABLED or
ENABLED .
4. Press ENTER to confirm this selection.
6.3.3. Delete
Follow these steps to Delete a printer format.
1. In the Configuration Menu, press the down arrow until FORMAT FORMAT FORMAT FORMAT
TICKETS TICKETS TICKETS TICKETS displays.
2. Press ENTER.
3. Press the down arrow until DELETE DELETE DELETE DELETE displays, then press ENTER .
4. Select NO or YES to delete the current ticket format.