Utility – set display intensity, Utility – key pad beep – Fairbanks FB6002 INSTRUMENTATION User Manual
Page 23
Section 3: User Operations
01/13
23
51293 Rev. 2
3.3.7.
Utility – Set Display Intensity
Follow these steps to set the Display Intensity.
1. While in the Operator Menu, press the down arrow and select the
UTILITY
UTILITY
UTILITY
UTILITY
option, then press
ENTER
.
2. Press
ENTER
when
SET DISPLAY INTENSIT
SET DISPLAY INTENSIT
SET DISPLAY INTENSIT
SET DISPLAY INTENSITY
Y
Y
Y
appears.
3. Select
LOW
LOW
LOW
LOW
,
MEDIUM
MEDIUM
MEDIUM
MEDIUM
or
HIGH
HIGH
HIGH
HIGH
, then press
ENTER
.
3.3.8.
Utility – Key Pad Beep
1. While in the Utility Menu, press the down arrow and select the
KEY PAD
KEY PAD
KEY PAD
KEY PAD
BEEP
BEEP
BEEP
BEEP
option, then press
ENTER
.
2. Select
ON
ON
ON
ON
or
OFF
OFF
OFF
OFF
, then press
ENTER
.
This manual is related to the following products: