Fairbanks FB6002 INSTRUMENTATION - Manual (Page 49)

Section 5: Configuration Menu
01/13 49 51293 Rev. 2
5.7. THRESHOLD WEIGHTS
INITIAL WEIGHT sets the minimum amount the truck must weigh to initiate a
weighment.
– Not used in the Manual Mode of Operation.
Follow these steps to set the Minimum Threshold Weight.
1. In the Configuration Menu, press the down arrow until THRESHHOLD THRESHHOLD THRESHHOLD THRESHHOLD
WEIGHTS WEIGHTS WEIGHTS WEIGHTS displays.
2. Press ENTER.
3. When INITIAL WEIGHT INITIAL WEIGHT INITIAL WEIGHT INITIAL WEIGHT displays, press ENTER .
4. Enter the correct amount, then press ENTER.
5.8. TRAFFIC LIGHT CONTROL
NOTE: See Section 7.1. Programming the Traffic Light Control for
complete instructions on this topic.