Fairbanks FB6002 INSTRUMENTATION User Manual
Page 58
Section 6: Serial Input / Output
01/13
58
51293 Rev. 2
6.5.1.
OKI ML420 Printer Settings, Continued
Follow these steps to change
MENU SETTINGS
.
1. To enter Menu Mode, press and hold the
SHIFT
key while pressing the
SELECT
key.
– The “MENU” legend will be illuminated while in the menu mode.
2. With the printer in the Menu Mode, press
key to print the complete menu.
The current default settings print out. It is recommended to use tractor fed paper.
NOTE:
The printed menu selections are different for each emulation mode.
3. Press the
GROUP
key to select the relevant group that needs to be changed
(the group is the left-hand column on the Menu printout).
4. Press the
ITEM
key to select the relevant item within the selected group (the
Item is the center column on the Menu printout).
5. Press the
SET
key to cycle through the settings available for the item you want to
change (the settings are the right-hand column on the Menu printout).
6. To exit the Menu Mode, press and hold the
SHIFT
key while pressing the
SELECT
key
C
A
U
T
I
O
N
!
Turning off the printer before exiting the
MENU mode
will lose any changes made.