Configuring the printer, Programming the instrument for a printer – Fairbanks FB6002 INSTRUMENTATION User Manual
Page 54
Section 6: Serial Input / Output
01/13
54
51293 Rev. 2
6.3. CONFIGURING THE PRINTER
Setting up the printer formats is programmed in the
Configuration Menu/
Format Tickets
menus.
6.3.1.
Programming the Instrument for a Printer
Follow these steps to setup the Instrument’s Printer.
1. In the Configuration Menu, press the down arrow
until
FORMAT
FORMAT
FORMAT
FORMAT
TICKET
TICKET
TICKET
TICKETS
S
S
S
displays.
2. Press
ENTER
when
PRINTER
PRINTER
PRINTER
PRINTER
displays.
3. Select one of the eight (8) currently used printers or DemandPC.
4. Press
ENTER
when
SELECT
SELECT
SELECT
SELECT
FORMAT
FORMAT
FORMAT
FORMAT
displays.
5. When
GTN
GTN
GTN
GTN
displays, either press
ENTER
to select it, or press the down arrow
to enter
INBOUND
INBOUND
INBOUND
INBOUND
,
OUTBOUND
OUTBOUND
OUTBOUND
OUTBOUND
,
BASICIN
BASICIN
BASICIN
BASICIN
, or
BASICOUT
BASICOUT
BASICOUT
BASICOUT....
6. When choosing the mode, press the down arrow to enter either
DISABLED
or
ENABLED
.
7. Press
ENTER
to confirm this selection.
•
1. TM-U295
•
4. TM-U590
•
7. SP-2000
•
2. IDP-3550
•
5. SP-700
•
8. SP-2200
•
3. TM-U230
•
6. SP-298
•
9. DemandPC