Fairbanks FB6002 INSTRUMENTATION - Manual (Page 37)

Section 5: Configuration Menu
01/13 37 51293 Rev. 2
5.1. CHANGE CUSTOMER PW
1. Press the MENU key.
2. When ENTER ENTER ENTER ENTER PASSWORD PASSWORD PASSWORD PASSWORD
displays, press the ENTER key.
3. Input the new Customer Password.
4. Press ENTER .
5. When CONFIRM CONFIRM CONFIRM CONFIRM PW PW PW PW displays, press ENTER again.
5.2. PROMPTS - PROGRAMMABLE
1. In the Configuration Menu, press the DOWN ARROW until PROMPTS PROMPTS PROMPTS PROMPTS –
PROGRAMMABLE PROGRAMMABLE PROGRAMMABLE PROGRAMMABLE displays.
2. Press ENTER when PROMPT PROMPT PROMPT PROMPT 1 1 1 1 displays.
3. Press ENTER when NAME NAME NAME NAME displays.
4. When NAME NAME NAME NAME displays, enter the NUMERICAL VALUE .
5. Press ENTER to add the Programmable Prompt to the system.
6. When GTN GTN GTN GTN displays, either select ENTER or press the down arrow. Choose
either DISABLED or ENABLED for one of the following options.
•
GTN GTN GTN GTN
•
Inbound Inbound Inbound Inbound
•
Outbound Outbound Outbound Outbound
•
Ba Ba Ba Basic In sic In sic In sic In
•
Basic Out Basic Out Basic Out Basic Out
7. Press ENTER to confirm this selection.