Fairbanks FB6002 INSTRUMENTATION - Manual (Page 26)

Section 4: Programming
01/13 26 51293 Rev. 2
4.1.2. Short-cut Method for Menu Navigations
Navigate through the different menu levels by entering a Hot-key Number and
immediately access functions of the next higher level.
– The Hot-key Number displays in the flow charts to the left of the function.
Follow these steps to navigate using the Hot-key Numbers.
1. Press a HOT-KEY NUMBER to advance to the functions of the next menu level.
2. Continue pressing the next HOT-KEY NUMBER, moving forward in the menu tree,
until the needed function is accessed.
3a. Press ENTER to access the function,
OR…
3b. Press MENU to move backward to the previous level.
4.1.3. Defining the Three Programming Menus
The three (3) programming menus are briefly defined below.
AUDIT TRAIL
Identifies how many times and when changes have been made to the
scale’s Calibration or Configuration settings.
NO Password required
OPERATOR
MENU Programs the Time/Date, Ticket Number, Load Cell Diagnostics, Tare
Entries, and Display Intensity.
NO Password required
CONFIGURATION
MENU
Programs Customer Passwords, Communications Programming and
Functions, Ticket Formats, Programmable Prompts, Device Input/Outputs,
and Weight Threshold.
Default Password = 1
Press the Hot-key Numbers 3 - 2 - 3 to print a duplicate ticket.
•
Press ENTER to access the function, or MENU to move
backward in the menu.
•
Press ENTER if no number is assigned.