Avaya Wireless AP-3 - Manual (Page 98)

Network
4-10 Avaya Wireless AP-3 User’s Guide
DNS Client
If you prefer to use host names to identify network servers rather than IP
addresses, you can configure the AP to act as a Domain Name Service
(DNS) client. When this feature is enabled, the Access Point contacts the
network’s DNS server to translate a host name to the appropriate network
IP address. You can use this DNS Client functionality to identify RADIUS
servers by host name. See
RADIUS for details.
Parameter Description
Enable DNS
Client Place a check mark in the box provided to
enable DNS client functionality. Note that this
option must be enabled before you can
configure the other DNS Client parameters.
DNS Primary
Server IP
Address The IP address of the network’s primary DNS
server.