Avaya Wireless AP-3 - Manual (Page 222)

VLAN/SSID
4-134 Avaya Wireless AP-3 User’s Guide
4. Add one or more new SSID/VLAN entries. Follow these steps:
NOTE:
For Dual-radio APs: APs with an 11a Upgrade Kit or 802.11b/g Kit
support up to 16 VLAN/SSID pairs. APs with an 802.11b PC Card or
a 5 GHz Upgrade Kit support only one VLAN/SSID per radio.
a. Click Add to create a new SSID/VLAN entry.
b. Enter a Network Name (SSID), between 1 and 32 characters,
in the field provided.
c. Enter a VLAN ID in the field provided.
— As defined by the 802.1Q standard, a VLAN ID is a
number between 1 and 4094. A value of -1 means that an
entry is "untagged".
— You can use the same VLAN ID for all SSIDs if you want
all wireless clients to be part of the same VLAN.
— You can specify a different VLAN ID for each SSID.
— The VLAN ID must match an ID used by your network;
contact your network administrator if you need assistance
defining the VLAN IDs.
— You can set the VLAN ID to "-1" or "untagged" if you do
not want clients that are using a specific SSID to be
members of a VLAN workgroup.
d. Click OK.
e. Click the back arrow button to return to the previous screen.