Avaya Wireless AP-3 - Manual (Page 348)

CLI Monitoring Parameters
A-62 Avaya Wireless AP-3 User’s Guide
CLI Monitoring Parameters
Using the show command with the following table parameters will display
operating statistics for the AP (these are the same statistics that are
described in
Monitor Information for the HTTP Web interface).
— staticmp: Displays the ICMP Statistics.
— statarptbl: Displays the IP ARP Table Statistics.
— statbridgetbl: Displays the Learn Table.
— statiapp: Displays the IAPP Statistics.
— statradius: Displays the RADIUS Authentication Statistics.
— statif: Displays information and statistics about the Ethernet
and wireless interfaces.
— stat802.11: Displays additional statistics for the wireless
interfaces.
— statethernet: Displays additional statistics for the Ethernet
interface.