Avaya Wireless AP-3 - Manual (Page 90)

Configuring the AP Using the HTTP Interface
4-2 Avaya Wireless AP-3 User’s Guide
• RADIUS: Configure RADIUS features such as RADIUS Access
Control and Accounting.
• VLAN/SSID : Configure VLAN IDs and SSIDs.
Configuring the AP Using the HTTP Interface
Follow these steps to configure an Access Point’s operating settings
using the HTTP interface:
1. Open a Web browser on a network computer.
NOTE:
The HTTP interface supports the following Web browser:
— Microsoft Internet Explorer 6 with Service Pack 1 or later
— Netscape 6.1 or later
2. If necessary, disable the Internet proxy settings. For Internet
Explorer users, follow these steps:
— Select Tools > Internet Options....
— Click the Connections tab.
— Click LAN Settings....
— If necessary, remove the check mark from the Use a proxy
server box.
— Click OK twice to save your changes and return to Internet
Explorer.