Avaya Wireless AP-3 - Manual (Page 351)

Parameter Tables
Avaya Wireless AP-3 User’s Guide A-65
— Static MAC Address Filter Table - Enable and disable specific
addresses
— Proxy ARP Parameters - Enable or disable proxy ARP for
wireless clients
— IP ARP Filtering Parameters - Control which ARP messages
are sent to wireless clients based on IP settings
— Broadcast Filtering Table - Control the type of broadcast
packets forwarded to the wireless network
— TCP/UDP Port Filtering - Filter IP packets based on TCP/UDP
port
• Alarms Parameters
— SNMP Table Host Table Parameters - Enter the list of IP
addresses that will receive alarms from the AP
— Syslog Parameters - Configure the AP to send Syslog
information to network servers
• Bridge Parameters
— Spanning Tree Parameters - Used to help prevent network
loops
— Storm Threshold Parameters - Set threshold for number of
broadcast packets
— Intra BSS Subscriber Blocking - Enable or disable peer to peer
traffic on the same AP
— Packet Forwarding Parameters - Redirect traffic from wireless
clients to a specified MAC address