Avaya Wireless AP-3 - Manual (Page 226)

Logging into the HTTP Interface
5-2 Avaya Wireless AP-3 User’s Guide
Logging into the HTTP Interface
Once the AP has a valid IP Address and an Ethernet connection, you may
use your web browser to monitor network statistics.
The Command Line Interface (CLI) also provides a method for viewing
network statistics using Telnet or a serial connection. This section covers
only use of the HTTP interface. For more information about viewing
network statistics with the CLI, refer to
Command Line Interface (CLI) .
Follow these steps to monitor an AP’s operating statistics using the HTTP
interface:
1. Open a Web browser on a network computer.
NOTE:
The HTTP interface supports the following Web browser:
— Microsoft Internet Explorer 6 with Service Pack 1 or later
— Netscape 6.1 or later
2. If necessary, disable the Internet proxy settings. For Internet
Explorer users, follow these steps:
— Select Tools > Internet Options....
— Click the Connections tab.
— Click LAN Settings....