Commands, In this chapter, Logging into the http interface – Avaya Wireless AP-3 User Manual
Page 244: Commands in this chapter
6
Avaya Wireless AP-3 User’s Guide 6-1
Commands
In This Chapter
•
Logging into the HTTP Interface
•
Download files from a TFTP server to the AP.
•
Upload configuration files from the AP to a TFTP server.
•
Reboot the AP in the specified number of seconds.
•
Reset all of the Access Point’s configuration settings to
factory defaults.
•
Configure the location where the AP Help files can be
found.
Logging into the HTTP Interface
Once the AP has a valid IP Address and an Ethernet connection, you may
use your web browser to issue commands.
The Command Line Interface (CLI) also provides a method for issuing
commands using Telnet or a serial connection. This section covers only
use of the HTTP Interface. For more information about issuing commands
with the CLI, refer to