Dhcp server parameters, Dhcp server table for ip pools – Avaya Wireless AP-3 User Manual
Page 356
Parameter Tables
A-70 Avaya Wireless AP-3 User’s Guide
DHCP Server Parameters
NOTE:
The DHCP Server (dhcpstatus) can only be enabled after a DHCP
IP Pool table entry has been created.
DHCP Server table for IP pools
Name
Type
Values
Access CLI Parameter
DHCP Server
Group
N/A
R
dhcp
DHCP Server
Status
Integer
enable (1) (default)
disable (2)
delete (3)
RW
dhcpstatus
Gateway IP
Address
IpAddress
User Defined
RW
dhcpgw
Primary DNS IP
Address
IpAddress
User Defined
RW
dhcppridnsipaddr
Secondary DNS IP
Address
IpAddress
User Defined
RW
dhcpsecdnsipaddr
Number of IP Pool
Table Entries
Integer32
N/A
R
dhcpippooltblent
Name
Type
Values
Access CLI Parameter
DHCP Server IP
Address Pool Table
Table
N/A
R
dhcpippooltbl
Table Index
Integer
User Defined
N/A
index
Start IP Address
IpAddress
User Defined
RW
startipaddr
End IP Address
IpAddress
User Defined
RW
endipaddr
Width
Integer
User Defined
RW
width