Avaya Wireless AP-3 - Manual (Page 261)

Symptoms and Solutions
7-6 Avaya Wireless AP-3 User’s Guide
Basic Software Setup and Configuration Problems
Lost AP, Telnet, or SNMP Password
1. Perform the Reset to Factory Default Procedure in this guide. This
procedure resets system and network parameters, but does not
affect the AP Image.
The default AP HTTP password is “public”, and the default Telnet
password is also “public”.
Client Computer Cannot Connect
1. Client computers should have the same Network Name and
security settings as the AP.
2. Network Names should be allocated and maintained by the
Network Administrator.
3. Refer to the documentation that came with your client card for
additional troubleshooting suggestions.