Avaya Wireless AP-3 - Manual (Page 303)

CLI Command Types
Avaya Wireless AP-3 User’s Guide A-17
Example 4. Display Prompts for Successive Parameters
Enter the command, a space, and then ?. Then, when the parameter
prompt appears, enter the parameter value. Result: The parameter is
changed and a new CLI line is echoed with the new value (in the first part
of the following example, the value is the IP Address of the TFTP server).
After entering one parameter, you may add another ? to the new CLI line
to see the next parameter prompt, and so on until you have entered all of
the required parameters. The following example shows how this is used
for the download Command. The last part of the example shows the
completed download Command ready for execution.
[Device Name]> download ?
[Device Name]> download 192.168.0.101 ?
[Device Name]> download 192.168.0.101 apimage ?
[Device Name]> download 192.168.0.101 apimage img