Avaya Wireless AP-3 - Manual (Page 148)

Management
4-60 Avaya Wireless AP-3 User’s Guide
Serial Configuration Settings
The serial port interface on the AP is enabled at all times. See Setting IP
Address using Serial Port for information on how to access the CLI
interface via the serial port. You can configure and view following
parameters:
Setting Description
Baud Rate Select the serial port speed (bits per
second). Choose between 2400, 4800,
9600, 19200, 38400, or 57600; the default
Baud Rate is 9600.
Flow Control Select either None (default) or Xon/Xoff
(software controlled) data flow control.
NOTE:
To avoid potential problems when
communicating with the AP through
the serial port, Avaya recommends that
you leave the Flow Control setting at
None (the default value).
Serial Data Bits This is a read-only field and displays the
number of data bits used in serial
communication (8 data bits by default).