Avaya Wireless AP-3 User Manual
Page 55
Initialization
2-24 Avaya Wireless AP-3 User’s Guide
8. Do one of the following:
— If the AP has been assigned an IP address by a DHCP server
on the network, write down the IP address and click Cancel to
close ScanTool. Go to
access the HTTP interface using this IP address.
—
If the AP has not been assigned an IP address (in other words,
the unit is using its default IP address, 10.0.0.1), follow these
steps to assign it a static IP address that is valid on your
network: