Avaya Wireless AP-3 - Manual (Page 212)

RADIUS
4-124 Avaya Wireless AP-3 User’s Guide
Configuring RADIUS Accounting
Follow these steps to enable RADIUS accounting on the AP:
1. Within the
RADIUS Accounting Configuration
screen, place a check
mark in the Enable RADIUS Accounting box to turn on this
feature.
2. Place a check mark in the box labeled Enable Primary RADIUS
Accounting Server.
3. If you want to configure a back-up RADIUS server, place a check
mark in the box labeled Enable Back-up RADIUS Accounting
Server.
4. Enter the session timeout interval in minutes within the
Accounting Inactivity Timer field. An accounting session
automatically ends for a client that is idle for the period of time
specified. Range is 1-60 minutes; default is 5 minutes.
5. Select a Server Addressing Format type (IP Address or Name).
— If you want to identify RADIUS servers by name, you must
configure the Access Point as a DNS Client. See DNS Client
for details.
6. Enter the server’s IP address or name in the field provided.
7. Enter the port number which the AP and the server will use to
communicate. By default, RADIUS accounting uses port 1813.