Example 6 - show individual and table parameters – Avaya Wireless AP-3 User Manual
Page 317
CLI Command Types
Avaya Wireless AP-3 User’s Guide A-31
Example 6 - Show Individual and Table Parameters
1. View a single parameter.
Syntax:
[Device Name]>show
Example:
[Device Name]>
show ipaddr
Result: Displays the Access Point IP address.
Figure A-11. Result of “show ipaddr” CLI Command
2. View all parameters in a table.
Syntax:
[Device Name]> show Example: [Device Name]> show mgmtipaccesstbl Result: Displays the IP Access Table and its entries.