Avaya Wireless AP-3 - Manual (Page 338)

Other Network Settings
A-52 Avaya Wireless AP-3 User’s Guide
Set Interface Management Services
Edit Management IP Access Table
[Device Name]>set mgmtipaccesstbl ipaddr
ipmask
Configure Management Ports
[Device Name]>set snmpifbitmask <(see below)>
[Device Name]>set httpifbitmask <(see below)>
[Device Name]>set telifbitmask <(see below)>
Choose from the following values:
Interface bitmask Description
0 or 2 = disable (all interfaces) All management channels
disabled
1 or 3 = Ethernet only Ethernet only enabled
4 or 6 = Wireless A only Wireless A only enabled
8 or 10 = Wireless B only Wireless B only enabled