Avaya Wireless AP-3 User Manual
Page 137
Interfaces
Avaya Wireless AP-3 User’s Guide 4-49
Frequency
Channel
When Auto Channel Select is enabled, this
field is read-only and displays the Access
Point’s current operating channel. When Auto
Channel Select is disabled, you can specify
the Access Point’s operating channel. If you
decide to manually set the unit’s channel,
ensure that nearby devices do not use the
same frequency (unless you are setting up a
WDS). Available Channels vary based on
regulatory domain. See
.
Transmit Rate
Select a specific transmit rate for the AP. The
values available depend on the Operational
Mode. Auto Fallback is the default setting; it
allows the AP to select the best transmit rate
based on the cell size.
• For 802.11b only -- Auto Fallback, 1, 2,
5.5, 11 Mbits/sec
• For 802.11g only -- Auto Fallback, 6, 9,
12, 18, 24, 36, 48, 54 Mbits/sec
• For 802.11bg and 802.11g-wifi -- Auto
Fallback, 1, 2, 5.5, 6, 9, 11, 12, 18, 24,
36, 48, 54 Mbits/sec
Parameter
Description